Sun protection insulated glazing LUXAR SILVERSTAR Selekt

Anti-reflective heat insulating and solar-reflective glazing in one: let the all-round qualities of LUXAR® SILVERSTAR® Selekt insulated glazing work to save you energy.

Our LUXAR® SILVERSTAR® Selekt anti-reflective heat insulating and solar-reflective glazing has everything to keep you comfortable: a high level of transparency, low reflection values of 3%, an optimized energy transmission level and U-values which ensure that your energy consumption stays modestly low – both in summer and in winter.

Our anti-reflective, heat-insulating and solar-reflective glazing is available with float glass, low-iron glass as well as tinted glass – and puts a stop to both heat loss as well as over-heating as a result of direct sunlight.

Sun protection insulated glazing LUXAR® SILVERSTAR® Selekt

LUXAR® SILVERSTAR® Selekt insulated glazing is the perfect all-rounder for heat insulating and solar-reflective applications. Its excellent U-values and minimized SHGC/g-values ensure that temperature levels remain balanced all year round – contributing towards reducing a building’s energy consumption. Typical applications include:

  • Architectural applications (heat-insulating facades, solar-reflection facades, winter gardens)

You can order LUXAR® SILVERSTAR® Selekt insulated glazing in various thicknesses – allowing you to achieve full room-height glazing.

Glass Thickness (Single sheet)

max. Dimensions

3–12 mm

max. 1900 x 3005 mm

LUXAR® SILVERSTAR® Selekt insulated glazing comprises for example of two 6mm-thick green glass sheets, a 16mm spacer filled with argon gas and achieves a light reflection value of 3.0% on the exterior.

A 16mm spacer filled with argon gas enables LUXAR® SILVERSTAR® Selekt insulated glazing to achieve a U-value of 1.0 W/m2K (EN 673) and an overall SHGC/g-value of 40%.

Handle LUXAR® SILVERSTAR® Selekt insulated glazing with care and store glass with its protective film (only where applicable) still attached, in an area protected from sunlight. Damage can be avoided by keeping supports, layers and suction tools clean. During installation, remove any traces of sealants right away. It is essential that you keep other building material such as lime or cement away from glass surfaces, as these binders can harm the coating. If the glass does get dirty, wash away any spilled material with plenty of water and avoid rubbing the material, as dirt grains may scratch the glass.

Further information can be downloaded here.

To ensure your LUXAR® SILVERSTAR® Selekt insulated glazing stays clear, it should be carefully and regularly cleaned. We recommend using a soft cotton cloth, or a sponge and plenty of water. If needed, non-abrasive, neutral detergents can also be added to the water.

Further information can be downloaded here

LUXAR® SILVERSTAR® Selekt is tested and certified to applicable ISO standards.

  • Abrasion ISO 9211-4
  • Adhesion ISO 9211-4
  • Humidity ISO 9022-2
  • Temperature ISO 9022-2
  • Solvent stability ISO 9211-4

As delivery formats and lead time depend on your requested glass make up, please contact us for further information.